Aluminum and Steel Fence Installation in Edmond, OK

Our aluminum and steel fence installation in Edmond, OK provides elegant, low maintenance metal fencing for front yards, backyards, and pools. We install ornamental panels that mimic wrought iron without the rust. Every fence is set level and secure to enhance both security and curb appeal.

Legendary Fence Company Edmond provides professional aluminum fence throughout Edmond, OK, Oklahoma and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 405-477-1804 or request your free quote.

Aluminum & Steel Fencing Tailored to Edmond Properties

If you are looking for a low‑maintenance fence that still looks sharp year after year, aluminum and steel are hard to beat. At Legendary Fence Company Edmond, we design and install metal fences specifically for Edmond yards, pools, and commercial properties, not one‑size‑fits‑all kits.

Aluminum fencing is popular around pools, front yards, and HOA neighborhoods because it offers an open, elegant look that does not block views. It resists rust, so it works well with Edmond’s mix of sun, wind, and occasional ice. Steel fencing is stronger and heavier, so it is ideal for security perimeters, dog runs for large breeds, or areas that take more abuse.

Before we quote anything, we walk the property with you. We look at your slope, soil, existing sprinkler lines, and any trees, and we ask how you actually use the space. For example, if you are near Covell Road or Broadway where wind gusts are higher, we may suggest heavier posts, smaller panel spans, or steel instead of aluminum for sections that catch the wind. If you are inside an HOA near Edmond schools, we check any height or style rules so you do not run into approval problems later.

We also take into account typical Edmond features like side-yard drainage swales and clay-heavy soil. These details affect where gates should go, how deep we set posts, and which style of aluminum or steel panel will stay straight and usable for the long term.

How Our Aluminum and Steel Fence Installation Process Works

Our installation process is structured and predictable so you know what is happening at each stage.

1. On-site consultation and layout: We start by marking proposed fence lines with flags or paint, then measuring carefully with a wheel and level. In Edmond, property lines can be confusing, especially in cul-de-sacs and corner lots, so when needed we align with your survey or recommend you get one. We also map out sprinkler heads and shallow irrigation lines so we can avoid them.

2. Utilities and permits: Before we dig any holes, we call Oklahoma 811 to locate buried utilities. For many residential jobs in Edmond, a full permit is not required for a standard-height privacy or pool fence, but rules vary by neighborhood and zoning. Legendary Fence Company Edmond will help you sort through the city’s requirements and any HOA paperwork.

3. Post setting: Strong posts are what keep an aluminum or steel fence from wobbling within a few years. We typically dig post holes 24 to 36 inches deep, deeper on slopes or in softer spots, then set posts in concrete. With Edmond’s clay and freeze-thaw cycles, we bell the bottom of the hole or add gravel under the concrete so water can drain and the posts are less likely to heave.

4. Panel installation and racking: Once posts cure, we attach pre-fabricated aluminum or steel panels, or in some cases build custom panels on site. On Edmond’s common sloped yards, we either step the fence or use rackable panels that angle to follow the ground without leaving big gaps. This is especially important for keeping small pets in and for pool code compliance.

5. Gates and hardware: We hang gates on reinforced gate posts, often using larger posts or deeper footing to prevent sagging. For pool and security gates, we add self-closing hinges, lockable latches, or keypad locks. Before we finish, we test every gate several times to ensure smooth operation and proper latch alignment.

6. Final walkthrough and cleanup: We walk the fence with you, check height, alignment, and panel spacing, and confirm that everything matches the plan. Then we clean up concrete bags, cut-offs, and packaging so your yard is ready to use.

Design Options for Aluminum and Steel Fences in Edmond

Metal fencing is more customizable than many people realize. Legendary Fence Company Edmond helps you choose a design that fits both your property and your budget, rather than just offering one or two catalog styles.

For aluminum fences, common choices in Edmond include classic spear-top designs for front yards, flat-top panels for pool areas, and two- or three-rail styles for property boundaries. We can adjust picket spacing to meet local pool safety codes or to keep small dogs inside. Decorative options like alternating picket heights, decorative finials, or accent rings can dress up the fence without adding a lot of cost.

Steel fences are available in similar styles but with thicker pickets and heavier rails, which gives them a more substantial look. We often recommend steel along alleys, commercial properties off Boulevard or Danforth, or around dumpsters and service areas where impact resistance matters.

Color is another key decision. Most homeowners in Edmond stick with black powder-coated aluminum or steel because it blends with landscaping and does not show dust. However, bronze and dark green can look great next to brick homes or wooded lots. The powder coating on quality aluminum and steel fencing is baked on, which means it will not peel like standard paint and requires very little maintenance beyond occasional rinsing.

If you are dealing with specific local challenges, such as homes backing up to greenbelts, drainage easements, or school properties, we can mix fence types. For example, we might install a solid wood or vinyl privacy fence on the sides of your yard and an open aluminum fence along the back, so you keep your view while still defining the boundary. Our team is used to working within Edmond HOA rules, so we can suggest styles that usually get approved quickly.

What Affects the Cost of an Aluminum Fence or Steel Fence

Several specific factors drive the cost of an aluminum or steel fence in Edmond, and understanding them helps you make decisions that fit your budget.

Material type and grade: Aluminum generally costs less than comparable ornamental steel and is lighter to work with, which can lower labor time. Within each material, there are residential, commercial, and industrial grades, each with different post thicknesses, picket sizes, and finishes. Around standard Edmond homes, residential or light commercial grade aluminum is usually enough, while heavy-use areas, large dogs, or commercial sites often justify a stronger grade or steel.

Fence height and footage: Taller fences use more material and sometimes require larger posts. Pool and front-yard ornamental fences are usually 4 to 5 feet tall, while security or commercial fences may go higher. We measure the true footage around curves and slopes, not just lot dimensions, so your estimate reflects reality.

Terrain and yard conditions: A flat, open yard in a newer Edmond subdivision is usually faster and less expensive to build on than a heavily treed lot near older neighborhoods. Rock, tree roots, retaining walls, and steep slopes require more labor, different hardware, or custom panel adjustments. If we expect to hit rock, we will let you know up front and explain how that might change the installation schedule or cost.

Gates and hardware: Gates are often the most used part of your fence and can be one of the higher-cost components. Double drive gates for boat or RV parking, specialty pool latches, or automatic openers all add to the overall price. During your estimate, we will talk through how you enter and exit the yard so we only add the gates and hardware you truly need.

Permits and special code requirements: If your project involves a pool, commercial site, or corner lot sightline issues, there may be extra code requirements. Legendary Fence Company Edmond is familiar with typical Edmond and Oklahoma City metro standards, and we build any extra cost for required upgrades into your written quote so there are no surprises.

Why Edmond Homeowners Choose Legendary Fence Company Edmond

Choosing the right installer is just as important as choosing the right aluminum or steel fence. A good product installed poorly will still lean, sag, or rust where it should not. Our team at Legendary Fence Company Edmond focuses on the details that matter over time in Edmond’s specific climate.

We understand local soil, wind, and drainage patterns from years of work across Edmond, from newer additions off I‑35 to established neighborhoods near the University of Central Oklahoma. That means we know where clay pockets are common, which areas tend to hold water after storms, and how to orient panels so your fence can handle the prevailing winds without rattling or bending.

Communication is another big piece. We provide clear written estimates that spell out materials, footage, gate count, and hardware, and we are upfront about lead times and start dates. If weather delays concrete curing or high winds make panel installation unsafe, we explain the situation and reschedule rather than rushing and cutting corners.

We also stand behind our work. If a gate needs a minor adjustment after the ground settles or after a heavy rain, you are not left on your own. Because we are local, it is easy to reach us for follow-up questions or future additions, such as extending the fence when you add a shed or converting a manual gate to an automated one.

If you are comparing quotes for an aluminum fence or steel fence in Edmond, ask each company how they set posts in clay soil, how they handle slopes, and what grade of material they are quoting. The answers will show you why many homeowners and businesses choose Legendary Fence Company Edmond for aluminum and steel fence installation that holds up for years.