Home › Commercial Gates and Access Control
We install commercial gates and access control systems in Edmond, OK for secure vehicle and pedestrian entry. Our solutions include sliding and swing gates with automatic operators, keypads, card readers, and safety devices. Each system is designed to integrate with your perimeter fencing and traffic flow.
Legendary Fence Company Edmond provides professional commercial gate installation throughout Edmond, OK, Oklahoma and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 405-477-1804 or request your free quote.
Commercial Gate Installation for Edmond Businesses
Legendary Fence Company Edmond designs and installs commercial gates and access control systems that match how your site actually operates, not just how it looks on a drawing. We work with warehouses, office parks, schools, storage facilities, HOAs, oilfield yards, auto dealers, and small local shops across Edmond and north Oklahoma City.
When we visit your property, we start by walking your perimeter, reviewing traffic patterns, and noting slopes, drainage, and utility locations. We look at the types of vehicles using the entrance, how often the gate will cycle per day, and any security risks such as hidden approach routes or poor lighting. This upfront assessment matters more than the hardware brand, because a gate that is undersized, in the wrong place, or installed in unstable Oklahoma clay will fail early, no matter what you paid for it.
Our team focuses on systems that can handle Oklahoma’s temperature swings, high winds, and storm-driven debris. In many Edmond commercial areas, wind load and power reliability are bigger issues than theft. We account for those realities when we size gate operators, set posts, choose hinges, and design fail-safe or fail-secure access control options.
Gate Types, Materials, and Layout Options
For commercial gate installation, the first major decision is gate type. Sliding gates are common along busy streets or tight lots because they move parallel to the fence line and do not swing into traffic or parking. Swing gates are simpler and usually cost less up front, but they need clear space inside the property and can be affected more by wind. Vertical lift or vertical pivot gates work well in areas with heavy snow drifts or limited side room, although around Edmond they are mainly used at higher security or industrial sites.
We typically build commercial gate frames from galvanized steel for strength and durability. Infills can be chain link, ornamental steel pickets, aluminum, privacy slats, wood overlays, or welded wire panels. Auto dealers might choose ornamental steel with tight picket spacing to discourage climbing, while storage facilities often choose chain link with barbed wire top for cost-effective perimeter control. Powder coating adds corrosion resistance and custom color, which can be important for HOAs or office complexes subject to design guidelines.
Layout decisions affect long-term performance more than many business owners realize. A sliding gate needs a clear run that is at least 1.5 times the opening width so the panel can fully retract. Grades must be checked so the gate does not drag after the first season of soil movement. We also plan where trucks queue, how delivery drivers exit, and how emergency vehicles will access the property if the automation fails. Legendary Fence Company Edmond prepares drawings that show these details before any concrete is poured.
Choosing the Right Access Control System
Access control is not one-size-fits-all. We match the security level and convenience you need with the type of users who will operate the gate. For a small Edmond contractor yard, a simple keypad with programmable codes may be enough. For multi-tenant office buildings or apartments, card readers, key fobs, or Bluetooth phone credentials are common because they make it easy to add and remove users without changing codes.
Where visitor management matters, such as at medical offices or gated communities, we often install telephone entry or video intercom systems. These let tenants or staff speak with visitors and buzz them in from a phone or smartphone app. For distribution centers and industrial yards, integration with existing badge systems, time clocks, or building access software can streamline operations and record who entered when.
We can also integrate safety and security devices, including photo eyes, in-ground vehicle loops, safety edges, magnetic locks, and strike plates. In Edmond, power outages and lightning are real concerns, so we commonly recommend battery backup for gate operators and surge protection on low-voltage lines. During design, Legendary Fence Company Edmond explains the tradeoffs between fail-safe (gate unlocks on power loss so people can exit) and fail-secure (gate stays locked for high security sites) so you can choose the right approach for your risk profile and local fire code requirements.
How the Commercial Gate Installation Process Works
Our commercial gate installation process is structured to avoid surprises and downtime. First, we schedule a site survey and information meeting. We document measurements, utilities, existing fencing, and any city of Edmond easements that might affect where your gate can be placed. If permits or HOA approvals are required, we identify those early and can assist with drawings and specifications.
After the design is set, we provide a written proposal that breaks out line items such as gate frame, operator, concrete, wiring, access control devices, and integration work. Once approved, we coordinate with you on timing. In central Oklahoma, late fall and winter installations can be efficient for commercial properties because traffic is often lighter, but we avoid concrete work in freezing or saturated conditions whenever possible to protect long-term stability.
On installation day, our crew sets gate posts and operator pads in reinforced concrete, sized for the gate weight, wind load, and soil conditions. We usually allow proper cure time before hanging and automating the gate, especially for large or cantilever systems. Electrical work includes routing conduit, pulling low-voltage and power cables, grounding the system, and labeling all terminations for easier future service.
Once everything is wired, we program the operators, controllers, and access devices, then run multiple test cycles. This includes obstruction testing with photo eyes and safety edges, verifying manual release operation, and confirming that fire department access (such as Knox key switches or strobe sensors if required) functions properly. We finish by training your staff on daily use, basic troubleshooting, and what to do during power failures.
Costs, Common Problems, and How We Avoid Them
Total cost for a commercial gate installation in Edmond is driven by gate size and weight, operator duty cycle, access control complexity, trenching distance for power and data lines, site conditions, and any custom fabrication or integration work. A simple chain link sliding gate with a basic keypad is at the lower end. A tall ornamental steel gate with high-cycle operator, video entry, and software integration sits higher. During estimates, Legendary Fence Company Edmond explains which components are essential and which are optional, so you can phase upgrades if needed.
Several common problems show up in commercial gate projects, especially when the focus is only on initial price. Undersized operators burn out quickly when exposed to frequent truck traffic. Posts set in shallow or unreinforced concrete begin to lean as Oklahoma clay expands and contracts. Poorly protected wiring becomes a recurring failure point after a couple of storm seasons. To avoid these headaches, we overspec operators for anticipated traffic, reinforce posts below frost depth, and run conduit properly sized and buried to protect your investment.
We also see issues when gates are installed without considering snow plows, delivery trucks with swing doors, or trash service clearances. That often leads to bent panels or blocked access. During planning, we ask about all the vehicles and vendors who use your property, then design clearances and stop locations accordingly. A bit more design time up front usually saves thousands in repairs later.
Maintenance, Repairs, and When to Schedule Work in Edmond
A well-built commercial gate still needs routine maintenance to stay reliable. At minimum, we recommend annual service that includes tightening hardware, lubricating hinges and rollers, checking chain or belt tension, testing safety devices, verifying battery backup operation, and reprogramming or updating access control where needed. High-cycle sites, such as storage facilities or logistics yards, often benefit from semiannual checks.
Legendary Fence Company Edmond offers maintenance plans and on-call repair service. If your gate is stuck open or closed, we can usually diagnose the cause quickly by checking operator fault codes, limit switches, safety sensors, and power supply. Many problems come from minor issues like misaligned photo eyes, worn rollers, or damaged loop wires, which can be corrected without replacing the entire operator.
In terms of timing, spring and fall are ideal in Edmond for both new installations and major repairs. Concrete cures more predictably, and we avoid the worst of summer heat that can be hard on electronic components and crews. If your business cannot afford daytime downtime, we can schedule work during off-hours or weekends for many projects. By coordinating ahead of time, we help you keep your property secure with as little disruption as possible.
