Many Edmond homeowners need more than new fence installation — they need old posts, concrete footings and footings removed before a fresh fence can go up. Removing posts set in concrete, deck footings, or short abandoned piers is a different job from installing a new fence. This guide explains the typical process, what affects cost in Edmond, how long it takes, and the smart questions to ask your contractor.

What the job often includes

• Locating and marking the posts and underground lines: Before any digging, a contractor locates utilities and marks the fence line. Even short, abandoned posts can have roots or hidden debris around them.

• Removing above-ground material: The crew cuts off rails, panels or attached hardware. If the posts are part of an old fence, panels may be removed intact for disposal or reuse.

• Extracting posts set in concrete: There are two common methods: pulling the entire post and concrete plug using mechanical equipment or digging the concrete out by hand and removing the plug in pieces. For larger footings, contractors may break up concrete with small breakers or jackhammers.

• Haul-away and disposal: Broken concrete and old posts are hauled off in a dump trailer. Disposal costs are a line item on many estimates and can vary with volume.

• Grade and backfill: After removal, holes are backfilled and compacted. Some homeowners opt to have the area re-sodded or left ready for new fence installation.

Why removing posts in concrete costs more than a simple tear-out

Posts embedded in concrete increase labor, equipment, and disposal time. Concrete plugs are heavy and often extend below frost line; they may require: additional excavation, use of a hydraulic puller or mini-excavator, concrete-breaking tools, and more workers. If posts are near a slab, driveway, or utilities, careful hand-digging is required to avoid collateral damage — that slows the job and raises cost.

Key cost factors for Edmond projects

• Number and size of posts/footings: Removing a dozen 4x4 posts with small concrete collars is cheaper than extracting a dozen 8- to 12-inch piers. The volume of concrete matters because disposal is charged by weight or cubic yards.

• Concrete depth and diameter: Wide, deep footings take longer to break up and remove. Deck footings or old piers often go deeper than simple fence post collars.

•Soil type and drainage: Edmond’s clay soils can compact tightly around concrete, making digging harder. Rocky or compacted areas slow excavation.

•Access and site constraints: Tight yards, narrow gates, or HOA rules that restrict equipment increase labor time. If a mini-excavator can’t reach the area, more manual labor is needed.

•Proximity to utilities and landscaping: If underground lines, irrigation, or mature trees are nearby, expect careful hand-digging and protective measures.

•Disposal and permit needs: Large volumes of concrete may need special disposal. In some Edmond neighborhoods, permits or HOA approvals are required before major removals.

Typical price ranges (Edmond, OK) — ballpark estimates

• Small jobs (few posts, small collars): $50–$150 per post including haul-away.

• Moderate jobs (10–30 posts, average collars): $100–$250 per post depending on concrete size and access.

• Large footings or deep piers: $250–$600+ per footing when mechanical breaking and extensive hauling are required.

These ranges are illustrative. A site visit is needed for an accurate written estimate because hidden conditions often change scope.

How long removal takes

A small backyard with good access (under 10 posts) can often be completed in one day. Larger jobs, tight access, or multiple deep footings may take several days. Weather can also affect scheduling — heavy rain turns Edmond clay into sticky, slow-to-work soil.

Questions to ask before hiring

• Will you locate utilities and mark the area before work begins?

• Do you pull posts and concrete whole or break concrete in place?

• What equipment will you use and will it fit through my gates?

• How do you handle disposal and what fees are included?

• Will you backfill and grade after removal, and is seeding or sod included?

• Do you offer a bundled price if I hire you for new fence installation afterward?

Preparing your property

Clear gate paths, move vehicles, and trim vegetation around the fence line. Flag any irrigation heads, landscape lighting, or buried items you’re aware of. Clear communication about access and next-step plans (new fence installation, landscaping) saves time and reduces change orders.

Why local experience matters in Edmond

Edmond’s soils, seasonal weather, and neighborhood rules affect how removal work is planned. A local fence company that understands common footing depths, disposal options, and HOA practices will give more reliable timelines and accurate pricing.

If you’re planning a new fence installation after removals, ask for a single contractor to handle both jobs — it often saves mobilization costs and prevents rework. For a safe, clean job and a clear written estimate, schedule an on-site evaluation with a respected local fence company.